update_issues

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Common update / installation issues =====

==== XBian RC 2 not booting ====

If your fresh install of Xbian 1.0 RC 2 won't boot (only blinking cursor + red light on the pi), follow these steps. Put sdcard back in your PC and edit cmdline.txt:

Replace
<code>
root=LABEL=xbian-copy
</code>

with
<code>
root=/dev/mmcblk0p2
</code>

==== Python upgrade ====

When upgrading, you can encounter this issue:
<code>
The following packages will be upgraded:
libpython2.7 python2.7 python2.7-minimal
3 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Need to get 0 B/5,438 kB of archives.
After this operation, 1,024 B of additional disk space will be used.
Do you want to continue [Y/n]? Y
Create a snapshot of '/tmp/btrfs-snap/root/@' in '/tmp/btrfs-snap/root/@btrfs-auto-snap_apt-run-2014-04-13-0953'
Delete subvolume '/tmp/btrfs-snap/root/@btrfs-auto-snap_apt-run-2014-04-13-0947'
@btrfs-auto-snap_apt-run-2014-04-13-0953, 1 created snapshots, 1 destroyed snapshots, 0 warnings.
(Reading database ... 32416 files and directories currently installed.)
Preparing to replace python2.7-minimal 2.7.3-6 (using .../python2.7-minimal_2.7.3-6+deb7u2_armhf.deb) ...
Unpacking replacement python2.7-minimal ...
dpkg: error processing /var/cache/apt/archives/python2.7-minimal_2.7.3-6+deb7u2_armhf.deb (--unpack):
trying to overwrite '/usr/lib/python2.7/lib-dynload/_hashlib.so', which is also in package python2.7 2.7.3-6
dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)
Errors were encountered while processing:
/var/cache/apt/archives/python2.7-minimal_2.7.3-6+deb7u2_armhf.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
</code>

Notice, that this is an issue with the official Raspbian Repository. However, the following fix takes care of it:
<code>
sudo sed -i '/_hashlib.so/d' /var/lib/dpkg/info/python2.7.list
sudo sed -i '/_ssl.so/d' /var/lib/dpkg/info/python2.7.list
</code>

Now continue your upgrade as did before.

==== AutoFS issues Beta 2 ====

If you are getting autofs errors trying to upgrade from Beta2 to RC1 just reboot and start the update process again.

==== dpkg errors on 256mb pi ====

This can happen when running any 'apt-get upgrade' and dpkg gets killed because OOM
<code>
E: Sub-process /usr/bin/dpkg exited unexpectedly
</code>

  * remove /etc/sysctl.d/xbian.conf
  * reboot
  * try again
  * if still not, try creating /etc/sysctl.d/xbian.conf with only one setting vm.min_free_kbytes = 16384
  * if 16384 still crashes dpkg, try 32768 or even 65536. (you have to reload setting from this file by "sudo sysctl -p /etc/sysctl.d/xbian.conf"

==== plymouth upgrade error ====

The problem looks like this when upgrading the XBian installation on a CuBox-I or Raspberry Pi device:
<code>
Setting up plymouth (0.8.8-16) ...
update-initramfs: deferring update (trigger activated)
update-rc.d: error: expected NN after start
usage: update-rc.d [-n] [-f] <basename> remove
update-rc.d [-n] <basename> defaults [NN | SS KK]
update-rc.d [-n] <basename> start|stop NN runlvl [runlvl] [...] .
update-rc.d [-n] <basename> disable|enable [S|2|3|4|5]
</code>

The solution is to apply this patch (manually):
<code>
--- /var/lib/dpkg/info/plymouth.postinst.old	2014-07-01 21:38:49.947752101 +0200
+++ /var/lib/dpkg/info/plymouth.postinst	2014-07-01 21:39:11.359011460 +0200
@@ -51,14 +51,14 @@
 fi
 # End automatically added section
 # Automatically added by dh_installinit
-if [ -x "/etc/init.d/plymouth" ]; then
-	update-rc.d plymouth start . 2 3 4 5 . stop . 0 6 . >/dev/null || exit $?
-fi
+#if [ -x "/etc/init.d/plymouth" ]; then
+#	update-rc.d plymouth start . 2 3 4 5 . stop . 0 6 . >/dev/null || exit $?
+#fi
 # End automatically added section
 # Automatically added by dh_installinit
-if [ -x "/etc/init.d/plymouth-log" ]; then
-	update-rc.d plymouth-log start . S . >/dev/null || exit $?
-fi
+#if [ -x "/etc/init.d/plymouth-log" ]; then
+#	update-rc.d plymouth-log start . S . >/dev/null || exit $?
+#fi
 # End automatically added section
 # Automatically added by dh_makeshlibs
 if [ "$1" = "configure" ]; then
</code>
User Tools

Site Tools

Page Tools
