User Tools

  • (equal to forum credentials)

Site Tools


usb_wifi_dongles

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

usb_wifi_dongles [2015/06/09 11:53]
deHakkelaar
usb_wifi_dongles [2015/06/10 17:14] (current)
deHakkelaar
Line 1: Line 1:
 **USB WiFi dongles** **USB WiFi dongles**
  
-All below BASH commands needs to be executed as user '​root'​.\\+Most all below BASH commands needs to be executed as user '​root'​.\\
 Best practice if troubleshooting/​installing WiFi is to login via SSH using the wired interface '​eth0'​. Best practice if troubleshooting/​installing WiFi is to login via SSH using the wired interface '​eth0'​.
  
Line 35: Line 35:
 Firmware blob is already installed at //"/​lib/​firmware/​rtlwifi/​rtl8192cufw.bin"//​.\\ Firmware blob is already installed at //"/​lib/​firmware/​rtlwifi/​rtl8192cufw.bin"//​.\\
 But needs a driver assigned thats already installed:​\\ But needs a driver assigned thats already installed:​\\
-<​code>​echo '​install 8192cu /​sbin/​modprobe --ignore-install 8192cu; /bin/echo "0df6 0077" >| /​sys/​bus/​usb/​drivers/​rtl8192cu/​new_id'​ | sudo tee /​etc/​modprobe.d/​8192cu.conf+<​code>​echo '​install 8192cu /​sbin/​modprobe --ignore-install 8192cu; /bin/echo "0df6 0077" >| /​sys/​bus/​usb/​drivers/​rtl8192cu/​new_id'​ | tee /​etc/​modprobe.d/​8192cu.conf
 echo "​options 8192cu rtw_power_mgnt=0 rtw_enusbss=0"​ >> /​etc/​modprobe.d/​8192cu.conf echo "​options 8192cu rtw_power_mgnt=0 rtw_enusbss=0"​ >> /​etc/​modprobe.d/​8192cu.conf
 echo "​8192cu"​ >> /​etc/​modules echo "​8192cu"​ >> /​etc/​modules
 reboot</​code>​ reboot</​code>​
usb_wifi_dongles.1433843590.txt.gz ยท Last modified: 2015/06/09 11:53 by deHakkelaar