xbian_cp_sk_tr

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== Creating Xbian image with CouchPotato, SickRage and Transmission for Raspberry Pi / Raspberry Pi 2 ====


=== Creating Xbian image on MicroSD/SD card ===

Recommended at least 8gb card with a speed of reading and writing 40Mbps

1. Download Xbian installer from http://www.xbian.org/getxbian/ 

2. Select version: Xbian 2014.12.15 rpi (recommended latest stable version without step 3.) For Raspberry Pi 2, use image for Pi2 model, don't use image from Raspberry Pi 1!

Additional information: Some early version cannot be updated and you have to change update servers (this was problem around dec. 2014 - feb. 2015, latest stable versions have been fixed with that problem)

3. Insert your microSD/SD card into Raspberry Pi, follow wizard to end (if you don't finish wizard, you won't be able to connect via ssh).


=== Connecting to ssh via Mac Os X Terminal ===
Change ip address of your xbian (default username - xbian).
<code>ssh xbian@192.168.x.x</code>
Enter password: raspberry

Steps to use commands in right order:

1. Check and get new updates
<code>sudo apt-get update</code>
2. Install package p7zip for extraction zip files
<code>sudo apt-get install p7zip-full</code>
3. Upgrading all packages to the latest version
<code>sudo apt-get upgrade –y</code>

4. Installing CouchPotato:
<code>sudo apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" xbian-package-couchpotato
</code>

5. Installing Transmission:
<code>sudo apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" xbian-package-transmission</code>

6. Install dependencies:
<code>sudo apt-get install python-cheetah git-core -y</code>

If for some strange reason this code doesn't work, please go to: http://www.htpcguides.com/install-sickrage-raspberry-pi-usenet-torrent-tv/ and copy it from there. Then will definitely work.

7. Install a working unrar for the Raspberry Pi:
<code>wget http://sourceforge.net/projects/bananapi/files/unrar_5.0.10-1_armhf.deb
</code>

8. Install the unrar package:
<code>sudo dpkg -i unrar_5.2.6-1_armhf.deb</code>

9. Git clone the SickRage installation into Raspbian:
<code>sudo git clone https://github.com/SiCKRAGETV/SickRage.git /opt/sickrage</code>

10. Make Xbian owner:
<code>sudo chown -R xbian:xbian /opt/sickrage</code>

11. Test to see if it works:
<code>python /opt/sickrage/SickBeard.py –d</code>

12. Install Upstart:
<code>sudo apt-get install upstart</code>
Confirm with Yes

13. Create the SickRage upstart script file
<code>sudo nano /etc/init/sickrage.conf</code>

Paste this SickRage upstart script
Raspbmc Note: if you are running Raspbmc remove the setuid and setgid lines. Change the exec line to su – pi -c “exec /opt/sickrage/SickBeard.py”

<code>#author "HTPCGuides.com"
#description "Upstart Script to run SickRage as a service on Ubuntu/Debian based systems"

#Set username for the process. Should probably be what you use for logging in
setuid xbian
setgid xbian

start on runlevel [2345]
stop on runlevel [016]

respawn

exec /opt/sickrage/SickBeard.py</code>
Hit Ctrl+x, press Y and then Enter

14. Run the service to see if it works:
<code>sudo service sickrage start</code>

15. You should see a message like this:
<code>sickrage start/running, process 14827</code>

16. You may still not be able to access it unless you reboot:
<code>sudo reboot</code>


=== Extra information: ===

At step 4. you can use one of these packages:

nzbget
<code>
sudo apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" xbian-package-nzbget</code>

sickbeard
<code>sudo apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" xbian-package-sickbeard</code>

headphones
<code>sudo apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" xbian-package-headphones</code>

This include all of them with couchpotato and transmission
<code>sudo apt-get install -y -o Dpkg::Options::="--force-confdef" -o Dpkg::Options::="--force-confold" xbian-package-download</code>

=== Default port of packages: ===

Transmission: http://x.x.x.x:9091/

NZBGet: http://x.x.x.x:9092/

Headphones: http://x.x.x.x:9093/

Sick Beard: http://x.x.x.x:9094/

CouchPotato: http://x.x.x.x:9095/

CouchPotato Wizard: http://x.x.x.x:9095/wizard

SickRage: http://x.x.x.x:8081/

=== If you have some problems with SickRage, you could try this: ===
Removing folder:

<code>cd /</code>
<code>cd opt</code>
<code>sudo rm -r -f sickrage</code>

Now repeat steps from 9 to 14.

=== Samba write access: ===
1. Connect to Xbian via terminal or Putty.

1. Enter default username: xbian and password: raspberry or raspberrz

2. At the prompt, enter:
<code>sudo nano /etc/usbmount/usbmount.conf</code>
3. In Nano (a text editor) find the line: 

SMBSHARE=no

4. Change 
<code>SHARERW=no</code>to 
<code>SHARERW=yes</code>
5.Exit Nano and save (Control+X, Y).

6.Reboot
<code>sudo reboot</code>
7.You should now be able to connect to you Pi in Windows using SMB with \\XBIAN\ or \\192.168.1.149\ (check your ip on Xbian) or find your Pi in your Network and have write permission.

=== Samba share protected with password ===

In default is enabled Public=Yes, but with this option on windows, doesn't require password and guest user have full permission, to disable this, follow these steps:

If you want to check if this is enable, type command:

<code>sudo testparm -s</code>

First you have to change password and enable username for samba share:

Change password for username:
<code>sudo smbpasswd -a xbian</code>

Enable account:
<code>sudo smbpasswd -e xbian</code>

<code>sudo net conf setparm xbmc-backup "guest ok" no</code>

Try this if step before didn't worked:
<code>sudo net conf setparm Name_Of_USB_Drive "guest ok" no</code>

Now there shouldn't be anymore: Public = Yes, check with:

<code>sudo testparm -s</code>

Reboot sytem:
<code>sudo reboot </code>

Try on Windows, open Explorer (WIN+E), at address bar type \\ip.of.your.xbian and try to open folder. Now should ask for username and password.


=== Change username and password for Transmission: ===
<code>sudo service transmission stop</code>
<code>cd /</code>
<code>cd etc</code>
<code>cd transmission</code>
<code>sudo nano settings.json</code>

find rpc-password= “insertyournewpassword“

find rpc-username= “insertyournewusername”

CTRL+X, Y in ENTER

<code>sudo service transmission start</code>

=== Access to web gui remote to Transmission: ===

<code>cd /</code>
<code>cd etc</code>
<code>cd transmission</code>
<code>sudo nano settings.json</code>

find <code>"rpc-enabled": no,</code>

change to 

<code>"rpc-enabled": yes,</code>

find <code>"rpc-whitelist": "here are some ip addresses that could access to transmission",</code>  

change it if you want to access from everywhere. Change to:

<code>"rpc-whitelist": "*.*.*.*",</code>

Option to enable or disable restriction of rpc-whitelist:

Enabled:

<code>"rpc-whitelist-enabled": true,</code>

Disabled:

<code>"rpc-whitelist-enabled": false,</code>

=== CouchPotato ===
In settings must be different folder for downloaded movies, otherwise movies wouldn't be moved/copied to your folder!! (Settings->Downloaders->Transmission->Directory)

Example:
<code>/home/xbian/downloads/Movies/</code>

=== If Xbian Config Gui doesn't start in XBMC/KODI ===

rename 30_packages.py to 30_packages.tmp

xbmc
<code>mv /usr/local/share/xbmc/addons/plugin.xbianconfig/categories/30_packages.py /usr/local/share/xbmc/addons/plugin.xbianconfig/categories/30_packages.tmp</code>


kodi
<code>mv /usr/local/share/xbmc/kodi/addons/plugin.xbianconfig/categories/30_packages.py /usr/local/share/xbmc/kodi/addons/plugin.xbianconfig/categories/30_packages.tmp</code>

=== Script for removing finished torrents ===

1. Step, stop transmission:
<code>
sudo service transmission stop
</code>

2. Go to /etc/transmission:
<code>
cd /etc/transmission
</code>

3. Create script file:
<code>
sudo nano autoremove.sh
</code>

4. Copy and paste text below, change "yourusername" and "yourpassword" to your user and password for transmission. After you paste it and edit, press "ctrl+x", "y" and "enter" (be careful how is text copied, it must be same as here, otherwise will not work correctly):

<code>#!/bin/sh
# the folder to move completed downloads to port, username,
# password
SERVER="9091 --auth yourusername:yourpassword"

# use transmission-remote to get torrent list from
# transmission-remote list use sed to delete first / last line
# of output, and remove leading spaces use cut to get first
# field from each line
TORRENTLIST=`transmission-remote $SERVER --list | sed -e '1d;$d;s/^ *//' | cut --only-delimited --delimiter=" " --fields=1`
transmission-remote $SERVER --list

# for each torrent in the list
for TORRENTID in $TORRENTLIST
do
echo Processing : $TORRENTID

# check if torrent download is completed
DL_COMPLETED=`transmission-remote $SERVER --torrent $TORRENTID --info | grep "Percent Done: 100%"`

# check torrents current state is
STATE_STOPPED=`transmission-remote $SERVER --torrent $TORRENTID --info | grep "State: Seeding\|Stopped\|Finished\|Idle"`
echo $STATE_STOPPED

# if the torrent is "Stopped", "Finished", or "Idle" after
# downloading 100%"
if [ "$DL_COMPLETED" ] && [ "$STATE_STOPPED" ]; then

# move the files and remove the torrent from Transmission
echo "Torrent #$TORRENTID is completed"
echo "Removing torrent from list"
transmission-remote $SERVER --torrent $TORRENTID --remove
else
echo "Torrent #$TORRENTID is not completed. Ignoring."
fi
done
</code>

5. Edit settings.json:
<code>
sudo nano settings.json
</code>

6. Search for:
<code>
"script-torrrent-done-enabled": false,
</code>

Now change "false" to "true"

<code>
"script-torrrent-done-enabled": true,
</code>

7. Set path to script in settings.json. Search for:

<code>"script-torrent-done-filename":"",
</code>

Add path:
<code>
"/etc/transmission/autoremove.sh"
</code>

Now looks something like this:

<code>
"script-torrent-done-filename": "/etc/transmission/autoremove.sh",
</code>

8. Run transmission service:

<code>
sudo service transmission start
</code>


=== Script was founded on xbian forum ===
Link: http://xbian.org/forum/thread-2781.html


=== Steps for SickRage were taken from this site:===
http://www.htpcguides.com/install-sickrage-raspberry-pi-usenet-torrent-tv/
User Tools

Site Tools

Page Tools
