User Tools
- Login (equal to forum credentials)
xbian_cp_sk_tr
Differences
This shows you the differences between two versions of the page.
|
xbian_cp_sk_tr [2015/11/30 12:14] nenad |
xbian_cp_sk_tr [2016/03/21 15:23] (current) nenad |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ==== Creating Xbian image with CouchPotato, SickRage and Transmission for Raspberry Pi / Raspberry Pi 2 ==== | ==== Creating Xbian image with CouchPotato, SickRage and Transmission for Raspberry Pi / Raspberry Pi 2 ==== | ||
| + | === **UPDATE - New official SickRage repository included! (jan2016)** === | ||
| === Creating Xbian image on MicroSD/SD card === | === Creating Xbian image on MicroSD/SD card === | ||
| - | Recommended at least 8gb card with a speed of reading and writing 40Mbps | + | Recommended microsd card size is 8gb with maximum speed of reading and writing around 40Mbps. Try to use external hd for downloading Movies, TV Shows ... Firtsly I used the same SD card for downloading Movies, TV Shows and after three months I get some bad sectors and boot problems. |
| 1. Download Xbian installer from http://www.xbian.org/getxbian/ | 1. Download Xbian installer from http://www.xbian.org/getxbian/ | ||
| - | 2. Select version: Xbian 2014.12.15 rpi (recommended latest stable version without step 3.) For Raspberry Pi 2, use image for that model, don't use image for Raspberry Pi 1, some thing may not work correctly or will not be optimized for Pi2. | + | 2. Select version: Xbian 2014.12.15 rpi (recommended latest stable version without step 3.) For Raspberry Pi 2, use image for Pi2 model, don't use image from Raspberry Pi 1! |
| - | Additional information: Some early version cannot be updated and you have to change update servers (this was problem around dec. 2014 - feb. 2015, latest stable versions have been fixed with that problem) | + | |
| - | 3. Insert your microSD/SD card into Raspberry Pi, follow wizard to end (if you don't finish wizard, you won't be able to connect via ssh). | + | Additional information: Some early version cannot be updated and you have to manualy change update repos (this was problem around dec. 2014 - feb. 2015, latest stable versions have been fixed) |
| + | |||
| + | 3. Insert your microSD/SD card into Raspberry Pi, go through wizard! (if you don't finish wizard, you won't be able to connect via ssh). | ||
| Line 41: | Line 43: | ||
| 7. Install a working unrar for the Raspberry Pi: | 7. Install a working unrar for the Raspberry Pi: | ||
| - | <code>wget http://sourceforge.net/projects/bananapi/files/unrar_5.0.10-1_armhf.deb | + | <code>wget http://sourceforge.net/projects/bananapi/files/unrar_5.2.6-1_armhf.deb |
| </code> | </code> | ||
| Line 48: | Line 50: | ||
| 9. Git clone the SickRage installation into Raspbian: | 9. Git clone the SickRage installation into Raspbian: | ||
| - | <code>sudo git clone https://github.com/SiCKRAGETV/SickRage.git /opt/sickrage</code> | + | <code>sudo git clone https://github.com/SiCKRAGE/SickRage.git /opt/sickrage</code> |
| 10. Make Xbian owner: | 10. Make Xbian owner: | ||
xbian_cp_sk_tr.1448882056.txt.gz · Last modified: 2015/11/30 12:14 by nenad
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
