User Tools

  • (equal to forum credentials)

Site Tools


xbian_cp_sk_tr

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

xbian_cp_sk_tr [2015/12/01 00:31]
nenad
xbian_cp_sk_tr [2016/03/21 15:23] (current)
nenad
Line 1: Line 1:
 ==== Creating Xbian image with CouchPotato,​ SickRage and Transmission for Raspberry Pi / Raspberry Pi 2 ==== ==== Creating Xbian image with CouchPotato,​ SickRage and Transmission for Raspberry Pi / Raspberry Pi 2 ====
  
 +=== **UPDATE - New official SickRage repository included! (jan2016)** ===
  
 === Creating Xbian image on MicroSD/SD card === === Creating Xbian image on MicroSD/SD card ===
  
-Recommended microsd ​8gb card with maximum speed of reading and writing around 40Mbps. ​Definitly ​use something with more than 20Mbps.+Recommended microsd card size is 8gb with maximum speed of reading and writing around 40Mbps. ​Try to use external hd for downloading Movies, TV Shows ... Firtsly I used the same SD card for downloading Movies, TV Shows and after three months I get some bad sectors and boot problems.
  
 1. Download Xbian installer from http://​www.xbian.org/​getxbian/ ​ 1. Download Xbian installer from http://​www.xbian.org/​getxbian/ ​
Line 12: Line 13:
 Additional information:​ Some early version cannot be updated and you have to manualy change update repos (this was problem around dec. 2014 - feb. 2015, latest stable versions have been fixed) Additional information:​ Some early version cannot be updated and you have to manualy change update repos (this was problem around dec. 2014 - feb. 2015, latest stable versions have been fixed)
  
-3. Insert your microSD/SD card into Raspberry Pi, follow ​wizard ​to end (if you don't finish wizard, you won't be able to connect via ssh).+3. Insert your microSD/SD card into Raspberry Pi, go through ​wizard(if you don't finish wizard, you won't be able to connect via ssh).
  
  
Line 42: Line 43:
  
 7. Install a working unrar for the Raspberry Pi: 7. Install a working unrar for the Raspberry Pi:
-<​code>​wget http://​sourceforge.net/​projects/​bananapi/​files/​unrar_5.0.10-1_armhf.deb+<​code>​wget http://​sourceforge.net/​projects/​bananapi/​files/​unrar_5.2.6-1_armhf.deb
 </​code>​ </​code>​
  
Line 49: Line 50:
  
 9. Git clone the SickRage installation into Raspbian: 9. Git clone the SickRage installation into Raspbian:
-<​code>​sudo git clone https://​github.com/​SiCKRAGETV/​SickRage.git /​opt/​sickrage</​code>​+<​code>​sudo git clone https://​github.com/​SiCKRAGE/​SickRage.git /​opt/​sickrage</​code>​
  
 10. Make Xbian owner: 10. Make Xbian owner:
xbian_cp_sk_tr.1448926303.txt.gz ยท Last modified: 2015/12/01 00:31 by nenad