Installation and Updates
Configuration
Accessing media files
Backup and restore
Expert / Developers
Peripherals
Installation and Updates
Configuration
Accessing media files
Backup and restore
Expert / Developers
Peripherals
This is an old revision of the document!
To enable the serial console, add console=ttymxc0,115200
to the command line, after setenv baseconfig
. The third line in /boot/boot.src.txt should look something like this:
setenv baseconfig console=ttymxc0,115200 coherent_pool=1M rw ahci_imx.hotplug=1 raid=noautodetect telnet root=/dev/mmcblk0p2 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 rootwait consoleblank=0 selinux=0 nohdparm splash dmfc=3Run /boot/mks to activate the change.
To enable a terminal on the serial console, copy the file /etc/init/tty1.conf
to /etc/init/tty3.conf
. Edit the last line in the new file, replace tty1 with ttymxc0, and 38400 with 115200. It should look like this:
exec /sbin/getty -8 115200 ttymxc0